【DIY】Disposable Wakasagi Reel Kit (Set of 3) 【Durable & Inexpensive】

Developed with the concept of overwhelming productivity and robustness, like an AK , this is a DIY smelt fishing reel kit.

We created this reel because we wanted an inexpensive reel that could be used heavily, rather than an expensive dedicated one.
The main body has an extremely simple structure with only one screw, a spring, and a few washers.
We pursued a tool that can be used without fear of malfunction.
If you get bored or it breaks, just throw it away. It's disposable anyway.

[What you need to prepare yourself]
Please purchase the following two items separately at Daiso.

- Electric eraser
- Craft bobbin

[Line]
Daiso's thin PE line is an excellent match, including cost performance.

[Color]
Black, red, white, and others are available, but we will basically send a random color.

[Notes]
The rod is not included, so please prepare one separately. The base diameter is φ5mm.
This product is a handmade DIY part. Please refrain from purchasing if you are looking for a finished product like a commercially available item.
This is a DIY kit that requires you to attach and adjust it to the electric eraser yourself.

[Assembly]
Please assemble in the following order, referring to the product images.

1. Insert the spring, short spacer, and washer onto the screw in that order, and then insert it into the main body.
2. Insert the middle spacer, long spacer (& spool), and two washers in that order, and tighten the nut.
3. Remove the front cap that is removed when replacing the battery of the Daiso electric eraser, and while pressing the head of the screw, insert the disposable smelt fishing reel in the same way (it will be stiff at first).

By pressing the head of the screw, the reel is released, and the rig will drop.
It is prone to backlash, so hold the reel with your finger while dropping it.

[TIP 1]
It is convenient to attach a mechanism to lock the line from being wound up too much.
Attach the float stopper, small bead, and large bead in that order.

[TIP 2]
The mysterious indentation next to the line hole is a spare eraser holder.
This is in case the eraser in the main body wears out or is lost.

[TIP 3]
The mysterious indentation on the back of the main body is designed to fit a Daiso neodymium magnet.
You don't need to attach it if you don't need a tapping base.

[TIP 4]
The spring is made strong. If it feels too strong, cut it to your desired length.
If lost, a spring from a mechanical pencil can also be used as a substitute.

#SmeltFishing #PublicSmelt #ElectricReel #Beginner #DIY #Handmade